IBM 5100 Apl Reference Manual

16
Syntax
) ERASE object name(s)
where:
object name(s) are global names separated by blanks.
The )FNS Command
The) FNS command displays the names of all global user-defined functions in the
active workspace. The functions are listed alphabetically. If the character para-
meter is specified, the names are displayed beginning with the specified character
or character sequence.
Note: You can interrupt the )FNS command by pressing the ATTN key.
Syntax
)FNS [character(s)]
where:
characteds) (optional) is any sequence of alphabetic and numeric characters
that starts with an alphabetic character and contains no blanks. This sequence
of characters determines the starting point for an alphabetic listing.
The )LIB Command
The) LIB command displays the file headers of the files on tape (library). The
file header contains the following information:
• File number. The files on tape are numbered sequentially, starting with 1.
• File I
D. The file I D can be from 1 to 17 characters. If the file contains a
stored workspace, the file ID is the same as the stored workspace ID.
• File type. The file type is a 2-digit code; the following chart gives the mean-
i
ng of each code:
File Type
Description
00
Unused file
01
Exchange data file (see Chapter 8)
02
General exchange data file (see Chapter 8)
03
BASIC source file

IBM 5100 Specifications

General

Brand	IBM
Model	5100
Category	Laptop
Language	English