7 Wait 15 seconds. Do all stations installed in the
Cluster appear and remain
on
the screen
presentation?
8
B
@]
@]
B
@]
@]
~
EJ
~
~
EJ
8
El
§]
@]
@]
§]
@]
~
CLUSTER
STATUS
FOR
ADAPTER
X
PRESS
ANY
KEY
TO
EXIT
Notes:
1.
Your Installation Manager has a Cluster map
that lists the station addresses and the order
in which the stations are connected. Compare
the map and the status screen presentation to
determine that all of the stations
on
the
Cluster are operating properly.
2.
The status screen shows all stations installed
on
your Cluster, and
is
updated every 3
seconds to show stations that are added to
or
removed from the Cluster.
YES - Your system has successfully completed
this test. Press any key and continue
with the next Test.
NO
-
Go
to the next step.
2200-8
Test
January
1984
To Next Page
Loading...
