If
you have any options to install, install them
at
this time.
Remove and read the Option Instructions
that
came in
the
carton with your option.
If
your options have
already
been
installed
and
require any cabling continue
with "System Cabling."
System
Cabling
When you have installed your options, connect your
cables and power cords
to
the
system unit as shown in
the following figure.
CAUTION
Connect power cords
to
properly grounded
receptacles.
Note:
If
you are using your television or a
non-mM
display, you could experience data errors when you
~
operate your diskette drive. This interference can
easily
be
corrected
by
moving your television
or
display a minimum
of
30-cm (12-in.) away from
your
mM
Portable Personal Computer.
1-26
Introduction
To Next Page
Loading...
