7 Ensure the ribbon
is
installed properly.
8 Ensure the forms
or
paper is inserted properly.
9 Ensure the forms
or
paper path has no
obstructions.
10 Ensure the tractors are adjusted properly.
If
you need help with any
of
the above, refer to
the operating instructions that came with your
printer.
11
Did you find any problem while doing the above
steps?
NO
-
Go
to
the next step.
YES - Correct the problem and restart the
printer self-test.
Note:
If
you are using a non-U.S. English
keyboard and your printout does not match
the desired character set, have your printer
serviced.
January
1984
Test
8000-5
To Next Page
Loading...
