7 Ensure the ribbon
is
installed properly.
8 Ensure your forms
or
paper
is
inserted properly.
9 Ensure the forms or paper path has no
obstructions.
10 Ensure the tractors are adjusted properly.
If
you need help with any
of
the above, refer to
the operating instructions that came with your
printer.
Did you find any problem while doing the above
steps?
NO
-
Go
to the next step.
YES - Correct the problem and restart the
printer self-test.
1"""'\
Note:
If
you are using a non-U.S. English
keyboard and your printout does not match
the desired character set, verify
that
the
switch settings are correct for the desired
character set.
If
the switch settings are
correct have your printer serviced.
8020-4
Test
January
1984
To Next Page
Loading...
