Section
2.
Problem Determination
Procedures
Introduction
The Problem Determination Procedures help you solve
operational
or
system failures. These procedures will
also perform a complete system checkout. By following
the step-by-step instructions and answering yes or no to
the questions asked, you will be able
to
determine
which unit of your system has a problem.
As part
of
your problem determination, you may have
to
load the Diagnostics diskette (the diskette is
at
the
back
of
this manual). The Diagnostics diskette has a
series
of
tests to help you find your problem in any
of
the five units of your system. These five units are the
system unit, expansion unit, keyboard, display, and
printer.
The Diagnostic diskette is programmed
to
test only the
system and its installed options. These tests are
performed in sequential order.
As each test is
successfully completed, the next test
will be performed.
January
1984
Problem Determination
2-1
To Next Page
Loading...
