Voltage Check
Warning:
Your printer must be set properly
for the Vac power available to you.
Connecting your printer to Vac power before
setting
it
to the correct voltage range will
damage your printer.
Your printer was set
at
the factory for the
standard U.S. voltage range. You must verify
this by looking into the window next to the
power cord connector
on
the back
of
the printer.
You will see the number 120.
If
you have other than standard U.S. voltage,
or
need help checking your printer voltage setting,
continue with "Voltage Selection"
on
the next
page.
If
you have standard U.S. voltage go to
step 18.
Window
IBM Color Printer
5-47
To Next Page
Loading...
