Continue with “Connecting cables, power cords, and installing side covers on your preinstalled
enclosure” on page 43.
16. Perform the mode 1 connection of two enclosures (A and B) by using YO cables (C and D) to a SAS
adapter pair (E). See Figure 39 on page 39.
Notes:
v Each adapter in the SAS adapter pair (C) has access to the other adapter and to all 48 drive bays.
v If 6 Gb SAS adapters are being used, they must be cabled by using 6 Gb SAS cables.
v For SAS adapter pairs, you can attach the cables to any adapter port when you use the same port
in both adapters.
Figure 38. Mode 1 connection of one 5887 disk drive enclosure by using YO cables to a SAS adapter pair
38 Power Systems: Installing the 5887 disk drive enclosure
To Next Page
Loading...
Need help?
General