d. Repeat steps “4.a” on page 50 to “4.c” on page 50 to attach the other outer slide-rail.
Installing the console unit in the rack
Learn how to install the console unit in the rack.
To install the console unit in the rack, complete the following steps:
1. Extend the inner part of the outer slide-rails and slide them forward to the front of the outer rails.
Carefully slide the rollers on the console unit into the notch in the slide-rails as shown in the
illustration.
Installing the 7316-TF4 18.5-Inch Flat Panel Rack-Mounted monitor and keyboard
51
To Next Page
Loading...
