# /opt/freeware/bin/rs_info
Please choose from the following or ’all’:
1) /dev/hdisk1
2) /dev/hdisk2
3) /dev/hdisk3
?
Where, hdisk2 is the only available IBM Flash adapter.
3. Select the number that is associated with the disk for which you want to run the rs_info utility, or
enter all if you want to select all the IBM Flash Adapters that are available to the system. If you
select 2 an output similar to the following screen is displayed:
Managing PCI adapters 203
To Next Page
Loading...
Need help?
General