v When RUNNING changes to OK, scroll to the bottom of the page and locate the installation summary.
v After a successful installation, SUCCESS displayed in the Result column of the installation summary
at the bottom of the page.
13. Remove the installation media from the drive.
14. Press F10 to exit SMIT.
Verifying the AIX device driver software
Learn how to verify the AIX device driver is installed for a PCI adapter.
To verify that the AIX device driver for an adapter is installed, do the following steps:
1. If necessary, log in as root user.
2. At the command line, type lslpp -l devices.xxxxxxxxxx where xxxxxxxxxx is the device package
name.
3. Press Enter.
If the adapter device driver is installed, the following is an example of the data that is displayed on the
window.
File set Level State Description
Path: /usr/lib/objrepos
devices.xxxxxxxxxx
5.3.8.0 COMMITTED Adapter name software
Verify that the file sets are installed at the AIX version level you are running. Level 5.3.8.0 is an example.
If no data is displayed on your screen, the adapter device driver was not installed correctly. Try
reinstalling the driver.
Managing PCI adapters 225
To Next Page
Loading...
Need help?
General