Table 33. Adapter LEDs and descriptions
LED Light Description
Activity/link Green Active link
Off No link
The absence of a link can indicate a defective cable,
defective connector, or a configuration mismatch.
Flashing Data activity
Operating system or partition requirements
This adapter is supported for the following versions of operating systems:
v AIX
– AIX Version 7.1 and Service Pack 3, or later.
– AIX Version 6.1 with the 6100-06 Technology Level, and Service Pack 3, or later.
– AIX Version 5.3 with the 5300-12 Technology Level and Service Pack 4, or later.
– AIX Version 5.3 with the 5300-11 Technology Level and Service Pack 7, or later.
v Linux
– Red Hat Enterprise Linux.
– For support details, see the Linux Alert website (www14.software.ibm.com/webapp/set2/sas/f/
lopdiags/info/LinuxAlerts.htm)
v IBM i
– IBM i 7.1 through VIOS.
– IBM i 6.1 through VIOS.
v VIOS
– VIOS support requires VIOS 2.2.0.11 with Fix Pack 24 and Service Pack 1, or later.
Related tasks:
Installing PCI adapters
Related reference:
IBM Prerequisite website
Parts information
PCI adapter placement
“Backplane daughter cards and RAID enablement cards” on page 2
Find links to topics that cover Backplane daughter cards and RAID enablement cards.
PCIe2 LP 2-port 10GbE SFP+ Copper Adapter (FC 5286; CCIN 5288)
Learn about the specifications and operating system requirements for the feature code (FC) 5286 adapter.
Overview
The PCIe2 LP 2-port 10GbE SFP+ copper adapter is the low-profile version of the FC 5288 adapter, which
is the full-height adapter. The names of these adapters are:
v FC 5286: PCIe2 LP 2-port 10GbE SFP+ copper adapter
v FC 5288: PCIe2 2-port 10GbE SFP+ copper adapter
v
110 Power Systems: Managing PCI adapters for the IBM Power 710 Express or the IBM Power 730 Express
To Next Page
Loading...
Need help?
General