For information about the fields that are displayed in the output, see “The rs_info utility fields.”
The rs_info utility fields:
Find the description and details about the fields that are displayed in the rs_info output when the
rs_info utility is run for the IBM Flash Adapter 90 (PCIe2 0.9TB) installed in the system or virtual
machine.
Table 50 provides the description and details of the fields in the rs_info utility output.
Table 50. The rs_info utility fields
Field Description
Device File The device file that is assigned by the operating system in which the IBM Flash Adapter is
installed.
Part Number The part number of the IBM Flash Adapters.
FRU Number The FRU number of the IBM Flash Adapters.
CCIN The CCIN number of the IBM Flash Adapters.
EC The EC number of the IBM Flash Adapter.
Firmware Level The current firmware version that is running on the card.
Serial The serial number of the IBM Flash Adapter.
Aux Serial The serial number of the auxiliary boards that are located in the IBM Flash Adapter. There
are no auxiliary boards that are located in the IBM Flash Adapter. Therefore, this field is
displayed as N/A.
Card State The state of the card. The different states follow:
v Shutdown
v Starting
v Formatting
v Uninitialized
v Good
v Shutting Down
v Fault
v Read Only Fault
v dStroying
v Unknown
Presented Capacity The capacity as viewed by the operating system.
Physical Capacity The full capacity of the flash on the IBM Flash Adapter, that is 1.2 Terabyte (TB). The extra
300 GB is used by the Flash adapter when bad flash blocks form in the flash storage, or
during Redundant Array of Independent Disks (RAID) protection.
Board Temperature The temperature on the card.
Board Current
®
The current drawn by the card.
Board Voltage The voltage across the card.
Board Power The amount of power used on the card.
Capacitor Voltage The voltage across the capacitors that are located on the card.
Powerloss Protection Displays True if capacitors are located on the card, and displays as False if capacitors are not
located on the card.
Total Board Runtime The total time for which the card is powered on through out the life of the card.
Flash Type The specific type of flash that is used on the IBM Flash Adapter.
Managing PCI adapters 207
To Next Page
Loading...
Need help?
General