EasyManuals Logo
Home>IBM>Server>8231-E2B

IBM 8231-E2B User Manual

IBM 8231-E2B
250 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #93 background imageLoading...
Page #93 background image
PCI Express (PCIe) Base and Card Electromechanical (CEM) 2.0
Maximum number
For the maximum adapters supported, see the PCI adapter placement topic collection for your
system.
Connectors
LC multimode fiber optic
SFP+ (small form-factor pluggable) with SR optics
Voltage
3.3 V and 12-V
Form factor
Short, low-profile with standard-size bracket
Cables
Cables are the responsibility of the customer. Use multimode fiber optic cables with short-wave
lasers that adhere to the following specifications:
v OM1
Multimode 62.5/125 micron fiber
200 MHz x km bandwidth
Maximum cable distance 1 is 33 m (108 ft)
v OM2
Multimode 50/125 micron fiber
500 MHz x km bandwidth
Maximum cable distance is 82 m (269 ft)
v OM3
Multimode 50/125 micron fiber
2000 MHz x km bandwidth
Maximum cable distance is 300 m (984 ft)
Operating system or partition requirements
The adapter is supported on the following versions of the operating systems:
v AIX
AIX Version 7.1 with Service Pack 3, or later
AIX Version 6.1 with the 6100-06 Technology Level, and Service Pack 5, or later
AIX Version 5.3 with the 5300-12 Technology Level and Service Pack 4, or later
v Linux
Red Hat Enterprise Linux 5.6 for POWER, or later
Novel SUSE Linux Enterprise Server Service Pack 4, or later
v IBM i
Support of this feature with IBM i requires VIOS 2.2 or later
IBM i 7.1, or later
v VIOS
VIOS support requires VIOS 2.2.0.12-FP24 SP02, or later
Note: If you are installing a new feature, ensure that you have the software that is required to support
the new feature and that you determine whether there are any prerequisites. To check for the
prerequisites, see IBM Prerequisite website (www-912.ibm.com/e_dir/eServerPrereq.nsf).
Replacing FCoE adapters by using hot swap
When hot swapping FCoE adapters, be aware that device-related software for the storage devices might
have additional devices that must be removed. See specific storage device documentation for information
about how to remove these additional devices. The adapter has a unique worldwide port name (WWPN).
Managing PCI adapters 81

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the IBM 8231-E2B and is the answer not in the manual?

IBM 8231-E2B Specifications

General IconGeneral
BrandIBM
Model8231-E2B
CategoryServer
LanguageEnglish

Related product manuals