Figure 99. Disconnecting the NVMe cables
9. Ensure that all cables are carefully positioned out of the way, such that the NVMe drive backplane
can be easily lifted and removed.
10. Carefully unscrew the captive thumbscrew (A) of the NVMe drive backplane until fully loose as shown
in Figure 100 on page 112.
If needed, use a Phillips screwdriver to loosen the screws.
Drive backplanes for the 9009-41A, 9009-41G, 9009-42A, 9009-42G, or 9223-42H
111
To Next Page
Loading...
