Figure 143. Reconnecting the power cable and signal cable to the drive backplane
3. For a rack-mounted system, replace the air baffle (A) straight down into the chassis as shown in Figure
144 on page 162.
For a stand-alone system, replace the air baffle (A) straight into the side of the chassis as shown in
Figure 145 on page 163.
Ensure that the front flap tucks under the front chassis.
Drive backplane cables in the 9009-41A, 9009-41G, 9009-42A, 9009-42G, or 9223-42H
161
To Next Page
Loading...
