IBM Aptiva 2153 - Bays 1, 2, 3 (5.25-In. Internal;External Bays)

4-34
Bays 1, 2, 3 (5.25-In. Internal/External Bays)
• Disconnect all cables on the drive (note location of cables).
• Remove the screws.
WARNING:
For 5.25-In. Hard Disk Drive installation, it uses different
screws from 3.5-In. Hard Disk Drive which may be installed in
Bay 5.
• Pull out the drive.
Figure 4- 31 Bay 1(5.25-in.)