IBM Aptiva 2170 User Manual

Check Procedures 69
•
Select Interactive Tests from the Main Menu.
•
Select and execute Video test from the menu.
•
Follow the prompts and perform the video test.
•
Go to“Index of Symptoms, Messages, Error Codes, or Beeps” on page 37.
•
You might have to adjust the monitor controls to obtain the best image.
003 - DOES THE MONITOR SUCCESSFULLY PASS ALL TESTS? (YES,
READ AHEAD. NO, GO TO STEP 004)
•
You have successfully completed the video diagnostics tests. If the problem
remains, go to “Index of Symptoms, Messages, Error Codes, or Beeps” on
page 37
•
End.
004 -
•
Power off the system unit.
•
Remove the hard disk drive system cable.
•
Power on the system unit.
005 - IS THE SCREEN STILL NOT READABLE?
•
Replace the monitor. If the symptom remains, replace the system board.
•
End.

IBM Aptiva 2170 Specifications

General

Brand	IBM
Model	Aptiva 2170
Category	Desktop
Language	English