ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³
Defect Descriptors
³
ÚÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´
³
BYTE 0
³
(MSB)
³
³
BYTE 1
³
Cylinder Number of Defect
³
³
BYTE 2
³
(LSB)
³
ÃÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´
³
BYTE 3
³
Head Number of Defect
³
ÃÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´
³
BYTE 4
³
(MSB)
³
³
BYTE 5
³
Defective Sector Number
³
³
BYTE 6
³³
³
BYTE 7
³
(LSB)
³
ÀÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
Figure 95. Defect Descriptors of Physical Sector Format
The defect list format field specifies the format of the defect list data returned by the target.
The Defect List Length field specifies the length in bytes of the defect descriptors that follow. The Defect
List Length is equal to eight times the number of defect descriptors.
If the Allocation Length is insufficient to transfer all of the defect descriptors, the Defect List Length will not
be adjusted to reflect the truncation. The target will not create a CHECK CONDITION status.
SCSI COMMAND SET 125