LINK This bit is set to one to indicate that the initiator desires an automatic link to the next command
upon successful completion of the current command. Upon successful completion of the
command, the file will return INTERMEDIATE GOOD status and then send one of the two mes-
sages defined under Flag above.
Upon unsuccessful completion of the command, the file will return CHECK CONDITION status
or RESERVATION CONFLICT status and then send the COMMAND COMPLETE message.
No further commands in the chain are executed.
7.2 Abbreviations
These abbreviations are used throughout the following sections:
LUN. Logical Unit Number. An encoded three bit identifier for the logical unit.
VU. Vendor Unique bits.
LBA. Logical Block Address.
RSVD. Reserved.
MSB. Most Significant bit.
LSB. Least Significant bit.
7.3 Byte ordering conventions
In this specification, where it is not explicitly stated, all multi-byte values are stored with the most significant
byte first. For example in a 4 byte field byte 0 will contain the MSB and byte 3 the LSB.
SCSI COMMAND SET 65
To Next Page
Loading...
