12.2.8 Additional Sense Code/Qualifier (Byte 12 and 13)
The following table shows the description of the combination of Sense Key / Sense Code / Qualifier.
Key Code Qual Description
0 00 00 No error.
0h 5Dh 00h No sense. Predictive Failure Analysis threshold reached.
1h 01h 00h Recovered write error no index
1h 02h 00h Recovered no seek comp
1h 03h 00h Recovered write error. Write fault.
1h 0Ch 01h Recovered write error with Auto-reallocation. Auto Reallocated.
1h 0Ch 03h Recovered write error. Recommend Reassign.
1h 14h 01h Recovered write error Id not found
1h 16h 00h Recovered write error DAM not found
1h 17h 00h Recovered read error without ECC applied.
1h 17h 01h Recovered read error with retries.
1h 17h 06h Recovered read error without ECC applied. Auto reallocated.
1h 17h 07h Recovered read error without ECC applied. Recommended reassign. This
value can be returned only when ARRE = 0.
1h 17h 09h Recovered read error without ECC applied. Data re-written. This value
can be returned only when ARRE = 1.
1h 18h 00h Recovered read error with ECC applied. This value can be returned only
when ARRE = 0.
1h 18h 02h Recovered read error with ECC applied. Auto reallocated. This value can
be returned only when ARRE = 1.
1h 18h 05h Recovered read error with ECC applied. Recommended reassign. This
value can be returned only when ARRE = 0.
1h 18h 07h Recovered read error with ECC applied. Data Rewritten. This value can
be returned only when ARRE = 1.
1h 1Ch 01h Primary Defect list Not Found. Requested Defect List Format is not sup-
ported. Default List Format is returned.(Read Defect Data Only)
1h 1Ch 02h Grown Defect list Not Found. Requested Defect List Format is not sup-
ported. Default List Format is returned.(Read Defect Data Only)
1h 44h 00h Internal target failure.
1h 81h 00h Internal logic error.
1h 5Dh 00h Predictive Failure Analysis threshold reached.
2h 04h 00h Not ready. Start spindle motor fail.
2h 04h 01h Not ready. In process of becoming ready.
2h 04h 02h Not ready. Initializing command required. (Start Unit)
2h 04h 04h Not ready. Format in progress.
2h 40h 80h Diag Fail - Bring-Up Fail.
208 OEM Spec. of DDRS-3xxxx
To Next Page
Loading...
