Table 7. Server events (continued)
Event Event Type Severi
ty
Message Description Cause User Action
pci_riser_temp_failed STATE_CHANGE ERRO
R
The
temperature of
PCI Riser {0} is
too high. ({1})
The GUI
checks the
hardware
state using
xCAT.
The hardware
part failed.
None.
server_fan_ok STATE_CHANGE INFO Fan {0} is ok.
({1})
The GUI
checks the
hardware
state using
xCAT.
The hardware
part is ok.
None.
server_fan_failed STATE_CHANGE ERRO
R
Fan {0} failed.
({1})
The GUI
checks the
hardware
state using
xCAT.
The hardware
part failed.
None.
dimm_ok STATE_CHANGE INFO DIMM {0} is ok. The GUI
checks the
hardware
state using
xCAT.
The hardware
part is ok.
None.
dimm_failed STATE_CHANGE ERRO
R
DIMM {0} failed. The GUI
checks the
hardware
state using
xCAT.
The hardware
part failed.
None.
pci_ok STATE_CHANGE INFO PCI {0} is ok. The GUI
checks the
hardware
state using
xCAT.
The hardware
part is ok.
None.
pci_failed STATE_CHANGE ERRO
R
PCI {0} failed. The GUI
checks the
hardware
state using
xCAT.
The hardware
part failed.
None.
fan_zone_ok STATE_CHANGE INFO Fan Zone {0} is
ok.
The GUI
checks the
hardware
state using
xCAT.
The hardware
part is ok.
None.
fan_zone_failed STATE_CHANGE ERRO
R
Fan Zone {0}
failed.
The GUI
checks the
hardware
state using
xCAT.
The hardware
part failed.
None.
drive_ok STATE_CHANGE INFO Drive {0} is ok. The GUI
checks the
hardware
state using
xCAT.
The hardware
part is ok.
None.
drive_failed STATE_CHANGE ERRO
R
Drive {0} failed. The GUI
checks the
hardware
state using
xCAT.
The hardware
part failed.
None.
dasd_backplane_ok STATE_CHANGE INFO DASD
Backplane {0} is
ok.
The GUI
checks the
hardware
state using
xCAT.
The hardware
part is ok.
None.
dasd_backplane_failed STATE_CHANGE ERRO
R
DASD
Backplane {0}
failed.
The GUI
checks the
hardware
state using
xCAT.
The hardware
part failed.
None.
14 IBM Elastic Storage System 3000: Service Guide