IBM Elastic Storage System 3000 User Manual

Table 7. Server events (continued)
Event Event Type Severi
ty
Message Description Cause User Action
server_cpu_ok STATE_CHANGE INFO All CPUs of
server {0} are
fully available.
The GUI
checks the
hardware
state using
xCAT.
The hardware
part is ok.
None.
server_cpu_failed STATE_CHANGE ERRO
R
At least one CPU
of server {0}
failed.
The GUI
checks the
hardware
state using
xCAT.
The hardware
part failed.
None.
server_dimm_ok STATE_CHANGE INFO All DIMMs of
server {0} are
fully available.
The GUI
checks the
hardware
state using
xCAT.
The hardware
part is ok.
None.
server_dimm_failed STATE_CHANGE ERRO
R
At least one
DIMM of server
{0} failed.
The GUI
checks the
hardware
state using
xCAT.
The hardware
part failed.
None.
server_pci_ok STATE_CHANGE INFO All PCIs of
server {0} are
fully available.
The GUI
checks the
hardware
state using
xCAT.
The hardware
part is ok.
None.
server_pci_failed STATE_CHANGE ERRO
R
At least one PCI
of server {0}
failed.
The GUI
checks the
hardware
state using
xCAT.
The hardware
part failed.
None.
server_ps_conf_ok STATE_CHANGE INFO All Power
Supply
Congurations
of server {0} are
ok.
The GUI
checks the
hardware
state using
xCAT.
The hardware
part is ok.
None.
server_ps_conf_failed STATE_CHANGE ERRO
R
At least one
Power Supply
Conguration of
server {0} is not
ok.
The GUI
checks the
hardware
state using
xCAT.
The hardware
part failed.
None.
server_ps_heavyload _ok STATE_CHANGE INFO No Power
Supplies of
server {0} are
under heavy
load.
The GUI
checks the
hardware
state using
xCAT.
The hardware
part is ok.
None.
server_ps_heavyload _failed STATE_CHANGE ERRO
R
At least one
Power Supply of
server {0} is
under heavy
load.
The GUI
checks the
hardware
state using
xCAT.
The hardware
part failed.
None.
server_ps_resource _ok STATE_CHANGE INFO Power Supply
resources of
server {0} are
ok.
The GUI
checks the
hardware
state using
xCAT.
The hardware
part is ok.
None.
server_ps_resource _failed STATE_CHANGE ERRO
R
At least one
Power Supply of
server {0} has
insufcient
resources.
The GUI
checks the
hardware
state using
xCAT.
The hardware
part failed.
None.
server_ps_unit_ok STATE_CHANGE INFO All Power
Supply units of
server {0} are
fully available.
The GUI
checks the
hardware
state using
xCAT.
The hardware
part is ok.
None.
Chapter 1. Events 15

IBM Elastic Storage System 3000 Specifications

General

Brand	IBM
Model	Elastic Storage System 3000
Category	Storage
Language	English