IBM Elastic Storage System 3000

Table 7. Server events (continued)
Event Event Type Severi
ty
Message Description Cause User Action
server_ps_unit_failed STATE_CHANGE ERRO
R
At least one
Power Supply
unit of server {0}
failed.
The GUI
checks the
hardware
state using
xCAT.
The hardware
part failed.
None.
server_ps_ambient_ok STATE_CHANGE INFO Power Supply
ambient of
server {0} is ok.
The GUI
checks the
hardware
state using
xCAT.
he hardware part
is ok.
None.
server_ps_ambient _failed STATE_CHANGE ERRO
R
At least one
Power Supply
ambient of
server {0} is not
okay.
The GUI
checks the
hardware
state using
xCAT.
The hardware
part failed.
None.
server_boot_status_ok STATE_CHANGE INFO The boot status
of server {0} is
normal.
The GUI
checks the
hardware
state using
xCAT.
The hardware
part is ok.
None.
server_boot_status _failed STATE_CHANGE ERRO
R
System Boot
failed on server
{0}.
The GUI
checks the
hardware
state using
xCAT.
The hardware
part failed.
None.
server_planar_ok STATE_CHANGE INFO Planar state of
server {0} is
healthy, the
voltage is
normal ({1}).
The GUI
checks the
hardware
state using
xCAT.
The hardware
part is ok.
None.
server_planar_failed STATE_CHANGE ERRO
R
Planar state of
server {0} is
unhealthy, the
voltage is too
low or too high
({1}).
The GUI
checks the
hardware
state using
xCAT.
The hardware
part failed.
None.
server_sys_board_ok STATE_CHANGE INFO The system
board of server
{0} is healthy.
The GUI
checks the
hardware
state using
xCAT.
The hardware
part is ok.
None.
server_sys_board _failed STATE_CHANGE ERRO
R
The system
board of server
{0} failed.
The GUI
checks the
hardware
state using
xCAT.
The hardware
part failed.
None.
server_system_event _log_ok STATE_CHANGE INFO The system
event log of
server {0}
operates
normally.
The GUI
checks the
hardware
state using
xCAT.
The hardware
part is ok.
None.
server_system_event _log_full STATE_CHANGE ERRO
R
The system
event log of
server {0} is full.
The GUI
checks the
hardware
state using
xCAT.
The hardware
part failed.
None.
server_ok STATE_CHANGE INFO The server {0} is
healthy.
The GUI
checks the
hardware
state using
xCAT.
The hardware
part is ok.
None.
server_failed STATE_CHANGE ERRO
R
The server {0}
failed.
The GUI
checks the
hardware
state using
xCAT.
The hardware
part failed.
None.
16 IBM Elastic Storage System 3000: Service Guide