IBM FlashSystem 710 - Systems Management

IBM FlashSystem 710 and IBM FlashSystem 810 11
Systems management
FlashSystem 710 and FlashSystem 810 have built-in LCD display (see Figure 5) to perform basic
configuration and monitoring tasks.
Figure 5. LCD display and controls
The following tasks can be performed through the LCD display:
Configure IP addresses
z
Reboot/shutdown the system
z
Monitor system status
z
FlashSystem 710 and FlashSystem 810 have built-in management module which runs a highly
customized Linux-based operating system that coordinates and monitors all significant functions in the
system. Management module has one RJ-45 Gigabit Ethernet port for remote management. The following
remote management methods are supported:
Java-based graphical user interface (GUI) through web browser
z
Command-line interface (CLI) through Telnet and Secure Shell (SSH)
z
Simple network management protocol (SNMP)
z
The following tasks can be performed with the management module:
Defining the user accounts and passwords
z
Configuring email notifications
z
Monitoring the status of the system:
z
Event log
z
Fans
z
Temperatures
z
Power
z
Managing other FlashSystem units in the network from the single web console
z