Contents
Safety notices ................................. v
Removing and replacing parts in the 7063-CR1 ................... 1
Removing and replacing a disk drive in the 7063-CR1 ..................... 2
Removing a disk drive from the 7063-CR1 system ...................... 3
Replacing a disk drive in the 7063-CR1 system ....................... 5
Removing and replacing the disk drive backplane in the 7063-CR1 ................. 8
Removing the disk drive backplane from the 7063-CR1 .................... 8
Replacing the disk drive backplane in the 7063-CR1 ..................... 11
Removing and replacing fans in the 7063-CR1 ........................ 13
Removing a system fan from the 7063-CR1 ........................ 13
Replacing a system fan in the 7063-CR1 ......................... 17
Removing and replacing memory in the 7063-CR1 ...................... 20
Removing and replacing PCIe adapters in the 7063-CR1 .................... 24
Removing a PCIe adapter from the 7063-CR1 system .................... 24
Replacing a PCIe adapter in the 7063-CR1 system ..................... 25
Removing and replacing a power supply in the 7063-CR1 .................... 26
Removing a power supply from the 7063-CR1 ....................... 26
Replacing a power supply in the 7063-CR1 ........................ 27
Removing and replacing the system backplane in the 7063-CR1 .................. 28
Preparing the 7063-CR1 system to remove the system backplane................. 29
Removing the system backplane from the 7063-CR1 ..................... 29
Replacing the system backplane in the 7063-CR1 ...................... 34
Preparing the 7063-CR1 system for operation after removing and replacing the system backplane ..... 44
Removing and replacing a system processor module in the 7063-CR1 ................ 45
Removing a system processor module from the 7063-CR1 system ................ 46
Replacing a system processor module in the 7063-CR1 .................... 50
Removing and replacing the time-of-day battery in the 7063-CR1 ................. 55
Removing and replacing the USB cable and connector in the 7063-CR1 ............... 56
Removing the USB cable and connector from the 7063-CR1 .................. 56
Replacing the USB cable and connector in the 7063-CR1 ................... 58
Common procedures for servicing the 7063-CR1 ................. 61
Before you begin ................................. 61
Identifying the 7063-CR1 system that contains the part to replace ................. 64
LEDs on the 7063-CR1 system ............................ 64
Identifying the 7063-CR1 that needs servicing ....................... 65
Preparing the 7063-CR1 system to remove and replace internal parts ................ 66
Preparing the 7063-CR1 system for operation after you remove and replace internal parts ......... 68
Starting and stopping the 7063-CR1 ........................... 69
Starting the 7063-CR1 system ............................ 69
Stopping the 7063-CR1 system ............................ 69
Disk drive commands for the 7063-CR1 system ....................... 70
mvCLI commands ................................ 70
Creating the virtual drive on the 7063-CR1 system ..................... 73
Sensor readings GUI display ............................. 74
Removing and replacing covers on a 7063-CR1 system ..................... 75
Removing the service access cover from a 7063-CR1 system .................. 75
Installing the service access cover on a 7063-CR1 system ................... 76
Service and operating positions for the 7063-CR1 system .................... 77
Placing a 7063-CR1 system into the service position ..................... 77
Placing a 7063-CR1 system into the operating position .................... 78
Removing and replacing power cords .......................... 80
Disconnecting the power cords from a 7063-CR1 system ................... 80
Connecting the power cords to a 7063-CR1 system ..................... 80
© Copyright IBM Corp. 2018 iii
To Next Page
Loading...
