7. Replace the fans. For instructions, see “Replacing a system fan in the 7063-CR1” on page 17.
What to do next
Prepare the system for operation. For instructions, see “Preparing the 7063-CR1 system for operation after
you remove and replace internal parts” on page 68.
Removing and replacing fans in the 7063-CR1
Learn how to remove and replace fans in the IBM 7063-CR1 Hardware Management Console system.
Removing a system fan from the 7063-CR1
Learn how to remove fans from the IBM 7063-CR1 Hardware Management Console system.
Before you begin
(L008)
Figure 9. Connecting the drive signal and power cables
Removing and replacing parts in the 7063-CR1 13
To Next Page
Loading...
