Step 15: Are You Using an Ethernet Connection?
Ask your system administrator if you are unsure whether you are using an Ethernet
connection. If you already connected your ethernet to an adapter in “Step 9: Connect
the Adapter Cables” on page 5, or if you are not using Ethernet, go to “Step 18: Plug in
the Power Cables” on page 15.
To connect the Ethernet cable, first determine which kind you have:
v For Twisted-Pair (RJ-45,10/100 Base T), go to “Step 16: Connect Twisted-Pair
Ethernet” on page 12.
v For Thick (AUI - 10 Base 5), go to “Step 17: Connect Thick Ethernet” on page 13.
Chapter 1. Setting Up the RS/6000 44P Series Model 170 11
To Next Page
Loading...
