Replacing the Left Side Cover
To replace the left side cover, do the following:
1. Align and insert the three slide tabs on the bottom of the side cover into their
respective slots on the chassis.
2. Rotate the cover into place, ensuring that the remaining slide tabs are aligned and
inserted.
3. Slide the cover toward the rear of the chassis, ensuring that the cover lays flat
against the chassis. The detent latches the cover, keeping it from sliding toward the
front of the machine.
4. Rotate the keylock located on the back of the system into the locked position.
Chapter 3. Installing Options for the RS/6000 44P Series Model 170 25
To Next Page
Loading...
