Note: Do not pinch or damage any cables or wires while installing the optional
media fan assembly.
15. Tighten the screws to hold the optional media fan assembly to the optional media
bays.
16. Replace the DASD cage removed in 9 on page 49. See steps 14 through 17 of
“Installing Disk Drives” on page 43.
17. Replace the left side cover as described in “Replacing the Left Side Cover” on
page 25.
18. Reconnect all cables.
19. Turn on the power.
50 44P Series Model 170 Installation Guide
To Next Page
Loading...
