Keyboard country and region code FRU/CRU part number
Polish 10N6979
Portuguese 10N6976
Romanian 89P8326
Russian 10N6986
Russian/Cyrillic 89P8328
Serbian/Cyrillic 89P8329
Slovak 10N6980
Spanish 10N6961
Swedish/Finnish 10N6870
Swiss/French/German 10N6973
Thailand 89P8334
Turkish 440 10N6982
Turkish 179 89P8336
U.K. English 10N6960
U.S. 89P8338
Yugoslav/Latin 89P8339
Power cords
The manufacturer provides a power cord with a grounded attachment plug to use with this product. To
avoid electrical shock, always use the power cord and plug with a properly grounded outlet.
Power cords used in the United States and Canada are listed by Underwriter's Laboratories (UL) and
certified by the Canadian Standards Association (CSA).
v For units intended to be operated at 115 volts: Use a UL-listed and CSA-certified cord set consisting of
a minimum 18 AWG, Type SVT or SJT, three-conductor cord, a maximum of 15 feet in length and a
parallel blade, grounding-type attachment plug rated 15 amperes, 125 volts.
v For units intended to be operated at 230 volts (within the U.S.): Use a UL-listed and CSA-certified cord
set consisting of a minimum 18 AWG, Type SVT or SJT, three-conductor cord, a maximum of 15 feet in
length and a tandem blade, grounding-type attachment plug rated 15 amperes, 250 volts.
v For units intended to be operated at 230 volts (outside the U.S.): Use a cord set with a grounding-type
attachment plug. The cord set should have the appropriate safety approvals for the country in which
the equipment will be installed.
v The power cords listed in the following table are specifically designed for a country or region and are
usually available only in that country or region.
Note: All power cords are considered a Tier 1 CRU.
Troubleshooting, service, and support using Systems Director Management Console 11
To Next Page
Loading...
Need help?
General
