14. Press C to create the RAID array.
15. In the Create and save new array menu, use the arrow keys to select Save Changes then exit this
menu, and then press Enter.
16. Press Esc to exit LSI MPT setup utility.
17. Press Esc to exit the previous menu.
18. Select Exit the Configuration Utility and Restart.
19. When a prompt displays the message, The action required is stop controller, enter Yes.
20. Press Esc three times to exit Setup.
21. Press Y to exit Setup completely.
Backing up partition profiles
Learn how to back up the profile data of a virtual server.
To back up the profile data of a virtual server, you must be a member of one of the following roles:
v Super administrator
v Service representative
To back up the profile data of a virtual server, perform the following steps:
1. In the Welcome page, under the Resource tab, select the server.
2. Select Actions > System Configuration > Manage Virtual Server Data > Backup.
3. Type the name you want to use for this backup file.
4. Click OK.
Systems Director Management Console problem analysis
Use this information to diagnose and repair problems that are related to the IBM Systems Director
Management Console (SDMC).
Troubleshooting, service, and support using Systems Director Management Console 17
To Next Page
Loading...
Need help?
General
