ServeRAID M5014/M5015 SAS/SATA Controller User’s Guide 2-1
Chapter 2
ServeRAID Controller
Hardware Installation
This chapter describes the procedures used to install the ServeRAID
M5014 and ServeRAID M5015 SAS/SATA controllers. It consists of the
following sections:
•
Section 2.1, “Requirements”
•
Section 2.2, “Quick Installation”
•
Section 2.3, “Detailed Installation”
•
Section 2.4, “SAS Device Cables”
•
Section 2.5, “After Installing the Controller”
2.1 Requirements
The following items are required for installation:
•
A ServeRAID M5014 or ServeRAID M5015 SAS/SATA controller
•
A host system with an available PCI Express expansion slot
•
The ServeRAID-M Support CD containing the documentation
•
The necessary internal cables
•
SAS physical disks or SATA II physical disks (Mechanical or Solid
State Devices, SSDs)
Note:
For optimal performance, use an uninterruptible power
supply.
To Next Page
Loading...
Need help?
General
