IBM Storwize V3500 User Manual

Closing the node canister
After installing options in a node canister, you must close the canister cover and
install the canister in the control enclosure.
Procedure
To close the canister, complete the following steps.
1. Reinstall the cover as shown in Figure 16.
a. Align the four hook slots on the cover with the pins on the canister.
b. Slide the cover toward the latch and release levers until it locks into place.
v3500115
Figure 16. Reinstalling the canister cover
Chapter 2. Installing the hardware 21

IBM Storwize V3500 Specifications

General

Brand	IBM
Model	Storwize V3500
Category	Network Hardware
Language	English