Figures
1. Rear view of a Storwize V3500 control enclosure 5
2. Data ports in the rear of the Storwize V3500
control enclosure ........... 5
3. Control enclosure support rails of a Storwize
V3500 system ............ 6
4. Expansion enclosure support rails on Storwize
V3500 ............... 7
5. USB flash drive ........... 7
6. Rack mounting rails and screws...... 10
7. Installing the rail spring ........ 11
8. Hole locations in the front of the rack .... 11
9. Opening the hinge brackets ....... 12
10. Closing hinge brackets and installing rear
screw .............. 13
11. Inserting the enclosure ......... 14
12. Removing a node canister........ 16
13. Removing the canister cover ....... 17
14. Host interface adapter and SFP transceivers 18
15. Installing 8 Gbps Fibre Channel 4-port host
interface adapter ........... 19
16. Reinstalling the canister cover ...... 21
17. Installing a node canister ........ 22
18. Removing a filler panel ........ 23
19. Installing a drive........... 24
20. Connecting the Ethernet cables ...... 25
21. Example configuration with two Fibre Channel
cables per canister .......... 26
22. Example configuration with four Fibre
Channel cables per canister ....... 26
23. Mini SAS HD to Mini SAS HD cable .... 27
24. Mini SAS HD to Mini SAS cable ..... 27
25. Example configuration with three SAS cables
per canister ............ 28
26. Node canister LEDs.......... 29
© Copyright IBM Corp. 2012, 2015 v
To Next Page
Loading...
