To Next Page

To Previous Page

Note: All of the information about the 2077-92F expansion enclosure is also

applicable to the 2077-A9F, 2078-A9F, and 2078-92F expansion enclosures.

LEDs on the front of the expansion enclosure

As Figure 119 shows, the front of the 2077-92F expansion enclosure contains LEDs

for the display panel (▌1▐) and for each of the power supply units (▌3▐).

▌1▐ Display panel LEDs

▌2▐ Rack retention thumb screws

▌3▐ Power supply unit LEDs

▌4▐ Power supply units (PSUs)

▌5▐ PSU fascia (1U)

▌6▐ Front fascia (4U)

The display panel (▌1▐) contains three LEDs that describe the operational status of

the expansion enclosure. Table 21 describes the function and meaning of the LEDs

on the front display panel.

Table 21. Display panel LEDs

Function Color Status Description

Power Green On The expansion

enclosure power is

on; this LED is

controlled by the

expansion enclosure.

Off The expansion

enclosure power is

off.

svc00960

Figure 119. LEDs on the front of the expansion enclosure

136 Storwize V5000 Gen2: Quick Installation Guide

Other manuals for IBM Storwize V5030

Questions and Answers:

Need help?

Do you have a question about the IBM Storwize V5030 and is the answer not in the manual?

General