Table 40. CIDR subnet mask information (continued)
Subnet Mask CIDR Equivalent Note
255.255.0.0 /16 Class B
255.254.0.0 /15 2 Class Bs
255.252.0.0 /14 4 Class Bs
255.248.0.0 /13 8 Class Bs
255.240.0.0 /12 16 Class Bs
255.224.0.0 /11 32 Class Bs
255.192.0.0 /10 64 Class Bs
255.128.0.0 /9 128 Class Bs
255.0.0.0 /8 Class A
254.0.0.0 /7 2 Class As
254.0.0.0 /6 4 Class As
252.0.0.0 /5 2 Class As
248.0.0.0 /4 8 Class As
224.0.0.0 /3 16 Class As
192.0.0.0 /2 32 Class As
128.0.0.0 /1 64 Class As
0.0.0.0 /0 IP space
Authentication Method Decision Tree:
The Storwize V7000 Unified systems require one, and only one, authentication
system to allow network users to access file systems or file sets exported (shared)
by the Storwize V7000 Unified system. The authentication system may also be
used to provide User ID mapping. Several authentication methods are supported.
They are:
v Microsoft Active Directory - with or without SUA / SFU
v Lightweight Directory Access Protocol (LDAP)
v Network Information Service (NIS
A local LDAP server can also be used which runs on the file modules, but this is
limited. For example it does not support asynchronous filesystem replication to
another Storwize V7000 Unified system. Refer to Managing authentication and ID
mapping, located in the Information Center.
Use the flow chart below to assist in deciding which authentication method is right
for you. The factors that influence the decision are the types of client hosts, the
existing authentication infrastructure (if any), and if asynchronous file system
replication is to be utilized.
60 IBM Storwize V7000 Unified: Adding Storwize V7000 File Modules to an existing Storwize V7000 system 2073-720
To Next Page
Loading...
Need help?
General
