IBM Storwize V7000 User Manual

1189 The node is held in the service state.
Explanation: The cluster is reporting that a node is
not operational because of critical node error 690. See
the details of node error 690 for more information.
User response: See node error 690.
1202 A solid-state drive is missing from the
configuration.
Explanation: The offline solid-state drive (SSD)
identified by this error must be repaired.
User response: In the management GUI, click
Troubleshooting > Recommended Actions to run the
recommended action for this error. Otherwise, use MAP
6000 to replace the drive.
1691 A background scrub process has found
an inconsistency between data and
parity on the array.
Explanation: The array has at least one stride where
the data and parity do not match. RAID has found an
inconsistency between the data stored on the drives
and the parity information. This could either mean that
the data has been corrupted, or that the parity
information has been corrupted.
User response: Follow the directed maintenance
procedure for inconsistent arrays.
1189 • 1691
Chapter 9. Event reporting 157

IBM Storwize V7000 Specifications

General

Model	Storwize V7000
Storage Type	Hybrid Flash Array
RAID Levels	0, 1, 5, 6, 10
Form Factor	2U
Drive Types	SSD, SAS
Host Interface	8 Gbps Fibre Channel, 16 Gbps Fibre Channel, 1 Gbps iSCSI, 10 Gbps iSCSI, 12 Gbps SAS
Maximum Cache	32GB
Operating System Support	IBM AIX, Linux, Windows, VMware
Data Reduction Features	Real-time Compression
Management Software	IBM Spectrum Virtualize