IBM System x3100 M4 - Page 93

Table 6. IMM2 error messages (continued)
v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v If an action step is preceded by “(Trained technician only),” that step must be performed only by a trained
technician.
4000004b-
00000000
SNMPv1 [arg1] set by
user [arg2]:
Name=[arg3],
AccessType=[arg4],
Address=[arg5].
Info A user changed
the SNMP
community string.
No action; information only.
4000004c-
00000000
LDAP Server
configuration set by
user [arg1]:
SelectionMethod=
[arg2],
DomainName=[arg3],
Server1=[arg4],
Server2=[arg5],
Server3=[arg6],
Server4=[arg7].
Info A user changed
the LDAP server
configuration.
No action; information only.
4000004d-
00000000
LDAP set by user
[arg1]: RootDN=[arg2],
UIDSearchAttribute=
[arg3],
BindingMethod=[arg4],
EnhancedRBS=[arg5],
TargetName=[arg6],
GroupFilter=[arg7],
GroupAttribute=[arg8],
LoginAttribute=[arg9].
Info A user configured
an LDAP
Miscellaneous
setting.
No action; information only.
4000004e-
00000000
Serial Redirection set
by user [arg1]:
Mode=[arg2],
BaudRate=[arg3],
StopBits=[arg4],
Parity=[arg5],
SessionTerminate
Sequence=[arg6].
Info A user configured
the Serial Port
mode.
No action; information only.
4000004f-00000000 Date and Time set by
user [arg1]:
Date=[arg2],
Time-[arg3], DST
Auto-adjust=[arg4],
Timezone=[arg5].
Info A user configured
the Date and Time
settings.
No action; information only.
40000050-
00000000
Server General Settings
set by user [arg1]:
Name=[arg2],
Contact=[arg3],
Location=[arg4],
Room=[arg5],
RackID=[arg6], Rack
U-position=[arg7].
Info A user configured
the Location
setting.
No action; information only.
40000051-
00000000
Server Power Off Delay
set to [arg1] by user
[arg2].
Info A user configured
the Server Power
Off Delay.
No action; information only.
Chapter 3. Diagnostics 73