3. Restart the server from the diskette.
4. At the a:\ prompt, type extrmdmi.exe, and press Enter.
5. To change the machine type and model number, type mtm xxxxyyy where xxxx
is the model type and yyy is the model number; then, press Enter.
6. To change the serial number, type sn zzzzzzz where zzzzzzz is the serial
number; then, press Enter.
7. To change the asset tag, type asset aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
where aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa is the asset tag number; then,
press Enter.
8. Restart the server.
Chapter 5. Configuration information and instructions 157
To Next Page
Loading...
