When installing the keyboard bezel, do the following:
1. Attach the keyboard bezel to the computer, aligning the
three dents of the bezel with the hinges and the
projection.
2. Make sure that all of the claws on the front side of the
computer (b in removal step 6) are firmly attached.
3. Make sure that the claw on the bottom side of the
bezel is firmly attached.
4. Attach the connector firmly if the ThinkPad computer
features the touch pad, and then secure the screws.
Removing and replacing a FRU
ThinkPad T30 91
To Next Page
Loading...
