2020 Inverter card
For access, remove these FRUs in order:
v “1010 Battery pack” on page 63
v “2010 LCD front bezel” on page 117
3
2
1
4
Note: Step 1 is only for the models with 14.1-in. LCD. Inverter card in the
models with 15.0-in. LCD does not have the screw 1.
Step Screw (quantity) Color Torque
1 M2 × 4 mm, flat-head, nylon-coated (1) Black 0.167 Nm
(1.7 kgfcm)
When installing: Make sure that connectors 3 and 4 are attached firmly.
Cable
routing: When replacing the inverter card, route the connector cable as in
this figure:
Removing and replacing a FRU
ThinkPad T60 and T60p (14.1-inch and 15.0-inch) 119
To Next Page
Loading...
