Chapter 1
Introduction
This mainboard uses the TX PRO-II chipset to build a mainboard
which features the socket-7 architecture. The mainboard supports
all Socket-7 processors and permits bus speeds of 60/66/75 MHz.
The mainboard firmware supports CPU Plug and Play so that the
system will automatically adopt the correct configuration for the
Socket-7 processor that you install.
The mainboard is highly integrated and includes a built-in PCI 3D
Sound System and a built-in graphics adapter. The sound system
supports a 4-way speakers. The graphics system supports
extended VGA resolutions with a 4MB frame buffer.
Communications and networking are supported with a 56 Kbps
V.90 Fax/Modem DAA module and a 10BaseT/100BaseTX
network adapter. The mainboard supports either an AT or ATX
power supply. If you use an ATX supply, it supports many of the
ATX power management features.
The mainboard supports a full set of I/O ports and five expansion
slots. The board adheres to the Baby-AT form factor.
To Next Page
Loading...