- Power/Performance Bias
Select this choice to determine how the power management of the
microprocessor is controlled. You can choose either Platform Controlled
(system) or OS Controlled (operating system) to control the setting. Not all
operating systems support this feature.
- Platform Controlled Type
Select this choice to determine how to balance between performance and
power consumption. Choosing Maximum Performance will disable power
management functions and allow the most aggressive use of turbo.
Choosing Minimal Power will maximizes the use of power management
features for least power consumption and disable turbo.
– Legacy Support
Select this choice to view or set legacy support.
- Force Legacy Video on Boot
Select this choice to force INT video support, if the operating system does
not support UEFI video output standards.
- Rehook INT 19h
Select this choice to enable or disable devices from taking control of the
boot process. The default is Disable.
- Legacy Thunk Support
Select this choice to enable or disable UEFI to interact with PCI mass
storage devices that are non-UEFI compliant.
- Infinite Boot Retry
Select this choice to enable or disable Infinitely retry the Legacy Boot order.
- BBS Boot
Select this choice to enable or disable legacy boot in BBS manner.
– System Security
Select this choice to view or configure Trusted Platform Module (TPM)
support.
– Integrated Management Module
Select this choice to view or change the settings for the integrated
management module.
- Power Restore Policy
Select this choice to view or enable the POST watchdog timer.
- Commands on USB Interface Preference
Select this choice to enable or disable the Ethernet over USB interface on
IMM.
- Network Configuration
Select this choice to view the system management network interface port,
the IMM MAC address, the current IMM IP address, and the host name;
define the static IMM IP address, subnet mask, and gateway address;
specify whether to use the static IP address or have DHCP assign the IMM
IP address; save the network changes; and reset the IMM.
- Reset IMM to Defaults
Select this choice to view or reset IMM to the default settings.
- Reset IMM
Select this choice to reset the IMM settings.
– Recovery
102 System x3630 M4 Type 7158: Installation and User’s Guide
To Next Page
Loading...
