IBM x3630 M4 Type 7158 - Page 135

1. ASU sets the DMI in the Integrated Management Module II (IMM2). Select one
of the following methods to access the Integrated Management Module II
(IMM2) to set the DMI:
v Online from the target system (LAN or keyboard console style (KCS) access)
v Remote access to the target system (LAN based)
v Bootable media containing ASU (LAN or KCS, depending upon the bootable
media)
2. Copy and unpack the ASU package, which also includes other required files, to
the server. Make sure that you unpack the ASU and the required files to the
same directory. In addition to the application executable (asu or asu64), the
following files are required:
v For Windows based operating systems:
– ibm_rndis_server_os.inf
– device.cat
v For Linux based operating systems:
– cdc_interface.sh
3. After you install ASU, Type the following commands to set the DMI:
asu set SYSTEM_PROD_DATA.SysInfoProdName <m/t_model>-kcs [access_method]
asu set SYSTEM_PROD_DATA.SysInfoProdIdentifier <system model>-kcs [access_method]
asu set SYSTEM_PROD_DATA.SysInfoSerialNum <s/n>-kcs [access_method]
asu set SYSTEM_PROD_DATA.SysEncloseAssetTag <asset_tag>-kcs [access_method]
Where:
<m/t_model>
The server machine type and model number. Type mtm xxxxyyy, where
xxxx is the machine type and yyy is the server model number.
< system model>
The system model. Type system yyyyyyy, where yyyyyyy is the product
identifier such as x3550M3.
<s/n> The serial number on the server. Type sn zzzzzzz, where zzzzzzz is the
serial number.
<asset_method>
The server asset tag number. Type asset
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa, where
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa is the asset tag number.
[access_method]
The access method that you select to use from the following methods:
v Online authenticated LAN access, type the command:
[host <imm_internal_ip>] [user <imm_user_id>][password
<imm_password>]
Where:
imm_internal_ip
The IMM2 internal LAN/USB IP address. The default value is
169.254.95.118.
imm_user_id
The IMM2 account (1 of 12 accounts). The default value is USERID.
Chapter 3. Configuring the server 117