Attention:
v Two or more people are required to remove the system from a rack cabinet.
v To completely remove the server from the rack, press the latches on the
sides on the slide rails.
4. Loosen the two thumbscrews that secure the cover to the chassis.
5. Press on the two blue grip points and slide the cover toward the rear; then, lift
the cover off the server. Set the cover aside.
Attention: For proper cooling and airflow and to avoid damaging server
components, replace the cover before you turn on the server.
6. If you are instructed to return the server top cover, follow all packaging
instructions, and use any packaging materials for shipping that are supplied to
you.
Chapter 2. Installing optional devices 45
To Next Page
Loading...
