v For 1U PCI riser-card assembly 1:
a. Rotate the retention latch to the open position. Insert the adapter into
the PCI riser-card assembly, aligning the edge connector on the adapter
with the connector on the PCI riser-card assembly. Press the edge of
the connector firmly into the PCI riser-card assembly. Make sure that the
adapter snaps into the PCI riser-card assembly securely.
b. Rotate the retention latch to the close position. Make sure the retention
latch engages the adapter securely.
v For 2U PCI riser-card assembly 2:
a. Rotate down the retention latch to the open position. Insert the adapter
or ServeRAID adapter into the riser-card assembly, aligning the edge
connector on the adapter with the connector on the riser-card assembly.
Press the edge of the connector firmly into the riser-card assembly.
Make sure that the adapter snaps into the riser-card assembly securely.
b. Rotate the retention latch to the close position. Make sure the retention
latch engages the adapter securely.
Chapter 2. Installing optional devices 63
To Next Page
Loading...
