Basic Set
The “Basic Set” menu permits to set the following
options:
*Date *Time *Language
Select the “Basic Set” from the main menu by
pressing button.
Select the item by pressing button. The unit
you selected will be lighted.
Adjust the value by pressing buttons. Press
button to select the next item.
Press button to save and back.
Note: The Counter (cycle No) cannot be set by the
operator.
Advance Set
The “Setup” menu permits to set the following
options:
*Parameter *Unit *Preheat *Expire date (labels)
*Water quality (sensor) *Preheat *Factory reset
and see the information of: *Last error
Select “Setup” from the main menu by pressing
button.
Input the password digit to digit by pressing
and button to go next.
Password: 1111
Parameter
The “Parameter” menu permits to set the following
options:
*Holding time *Dry time
Select “Parameter” from the menu by pressing
button.
Select the program by pressing then press
button.
Select the parameter by pressing button. Adjust
it by pressing .
Press button to save and back.
Unit
To Next Page
Loading...
