Load
After selecting program, the materials to be sterilized can now be placed
on the tray and placed inside the chamber by the tray handle.
After the instruments are loaded, you may close the door.
Select the program
Enter to the main menu by pressing button,
Select “Program”. Select the program by
pressing then press to confirm program,
in the screen will appear the information of
selected program as the temperature and
sterilization time (holding time), also the date,
time, current pressure and current
temperature.
Start the sterilization program
Press to start the cycle. The stage, conditions
and the status of the cycle will appear on the
display. The sterilizers will perform the program
automatically. (see appendix 2).
To Next Page
Loading...
