Media Files on page 43.
.
.
25
Use these buttons to watch two different channels at the same time. See
Watching Two Channels Simultaneously on page 34.
.
.
26
Use the numeric buttons to enter numbers.
.
.
27
: Display subtitles. See Displaying Subtitles on page 33.
.
.
28
: Display teletext pages. See Viewing Teletext on page 34.
1.4 Getting Started
Install the digital TV receiver properly, referring to Installation on page 14.
Plug the power adapter into a power outlet, and insert the connector into the
power socket on the rear of the receiver. Then press the power button on the
remote control to turn on the receiver.
When turning on the receiver for the first time, the initial setup process automat-
ically starts. Follow the on-screen instructions to finish the process. At each step,
either make a choice or skip the step.
1. Choose a language for the user interface.
2. Configure the network settings. See Network Connection on page 21 and
Network Settings on page 57.
3. Install add-ons to internet-based apps, such as Free TV+ and Internet Ra-
dio+, when an internet connection is available. Additionally, determine
whether to restore the receiver using the stored settings and channels, if
there is any backup data.
4. Set the clock. See Clock Settings on page 58.
5. Scan for TV channels. See Scanning for Channels on page 22.
I 11
To Next Page
Loading...
